Clip Filled Objects when Writing DWG

Feature Overview

The ability for PowerDWG to automatically clip objects when writing (saving) a PowerCADD drawing as a DWG file.

Feature Description:

In PowerCADD, and on the Mac in general, we can create objects that are filled white; for example a rectangle that is filled white. If that filled rectangle is on top of another object, for example a line, the white fill hides the line (or portion of a line) below it as shown here:

That technique, which could loosely be referred to as masking, is a common one used in PowerCADD drawings and on the Mac OS^?. When a PowerCADD drawing using that technique is saved as a DWG file, the fill pattern is ignored (not a surprise) and in AutoCAD the user sees through the rectangle to the line below. As shown here, that is clearly not the same condition as we drew in PowerCADD (illustrated above).

[inline:PCD8_Wish_DWGClip_02.jpg]

So, what do we mean by clipping when writing a DWG file?
In the old days, PowerCADD has a Plot Driver built in -- that plot driver would cut or clip overlapping objects when creating the HPGL^? files necessary for output. In the example we're describing above, the results would be that the section of the line, hidden by the white fill, would be clipped where it intersects the sides of the rectangle. In effect, producing new line segments where they intersected. As shown here, if the PowerCADD PowerDWG Translator supported clipping, like it's old Plot Driver did, we'd see a result in AutoCAD that looked like this:

The result in AutoCAD would look like they did in the original PowerCADD drawing
[inline:PCD8_Wish_DWGClip_03.jpg]

A short trip in the way back machine, back to the roots of Engineered Software and their experience with writing Plot Drivers, would yield a valulable addition to the PowerDWG Translator that would bring us one step closer to WYSIWYG^? translation between the Mac (PowerCADD) and Windows (AutoCAD) worlds.

Of course, we'd like the clip filled objects feature to be a radio button optional setting so we can choose to turn it on or off. Yes -- we'd like it all, thank you very much

Work Around

Currently, the only work around is to manually trim the types of intersections illustrated earlier. Clearly, in a complex drawing, that can be an extensive (and expensive!) task, particularly where smart objects such as doors or windows are used to mask wall lines to create openings. The only other choice is to start the PowerCADD drawing, from the start, with the plan that is going to be exported via DWG to AutoCAD and draw down to that standard. While this is a reasonable approach, it negates many of the advantages we have by drawing on a Mac and with PowerCADD.

Cast your vote using the link below

Poll Choices are:

• Very Important Feature: you think the feature is a big deal and has a big impact to your workflow
• Important Feature: not critical to your workflow but something you'd find useful or would explore more deeply if it was there
• Not an Important Feature: this feature wouldn't impact your workflow at all and you're not interested or don't see value in exploring it

------
If you found this article or the website in general to be helpful, educational or a time and money saver you can show your support. Thank you ~ Brian (huc) Huculak